Breach Of Warranty & Product Liability Claims Dismissed Against Auto Service Provider

In 2008, the parents of Sean Reeps, brought suit against BMW, Martin Motor Sales and Hassel Motors ("Hassel"), alleging that Sean's mother, Debra, was exposed to gasoline fumes in the family's BMW during her pregancy, which resulted in Sean being born with birth defects. The Complaint alleged causes of action in (1) negligence; (2) strict products liability; (3) breach of express warranty; and (4) breach of implied warranty (merchantability) . The timeline of events is as follows:

1991-In March and again in November, Reeps bring their 1989 BMW 525i to Hassel Motors, a licensed BMW dealer, to fix an exhaust odor inside the car.  Dealer fails to identiify an exhaust odor in March, but later identifies problem as a split fuel hose and repairs it under warranty.

1992-In May, Sean Reeps is born with birth defects, including cerebral palsy, which plaintiffs  attribute to Debra's  inhalation of gas fumes early in pregnancy.

1994-BMW recalls BMW525i vehicles due to safety defect that caused odor due to feed fuel hose. Car is no longer with plaintiffs at the time.

On summary judgment, BMW argued that plaintiff's claims were barred by the doctrine of spoliation because plaintiff could not establish a prima facie case without the car or the fuel hose to show the actual alleged defect.  BMW's expert testified by affidavit that the Reeps' leakage was caused by a split in the fuel hose, not by the defect that was the subject of the recall.  Thus, in the absence of the actual fuel hose, BMW argued, plaintiff could not demonstrate a defect. 

The trial court rejected BMW’s spoliation argument, holding that there was no evidence of “willful or contumacious conduct” by plaintiff in disposing of the car. Remarkably, the Reeps’ BMW was actually found, but clearly not in the same condition as it was in 1991 and, not surprisingly, without the original fuel hose. The trial court held that plaintiff was not “barred from pursuing his claim, but rather he will have the onerous trial burden of proving his case solely by circumstantial evidence.”

New York law requires that to establish a prima facie case for strict product liability or design defect, a plaintiff must show that the manufacturer marketed a product that was not reasonably safe in its design; that it was feasible to design the product in a safer manner; and that the defective design was a substantial factor in causing the plaintiff’s injury. When the product at issue is no longer available, and the plaintiff seeks to prove a manufacturing defect by circumstantial evidence, the plaintiff must not only establish that the product did not perform as intended, but must also exclude all other causes of failure not attributable to the manufacturer.

The trial court denied Hassel's motion for summary judgment. The gravamen for plaintiff’s claims against Hassel was that it was negligent in failing to find the split fuel hose when the Reeps first complained of fuel odor in March 1991. Plaintiffs argued that if Hassel had identified and repaired the problem, Mrs. Reeps would not have inhaled any fumes during her pregnancy. In denying the dealer’s motion for summary judgment, the court observed that there is a high bar for obtaining summary judgment in a negligence action. As the court noted, “Simply put, Hassel must prove that it was not negligent when it failed to find a source of the gas fumes complained of by the Reeps in March 1991. It has not done so.”

In its decision, dated April 5, 2012, the Appellate Division, First Department, weighed in on both the spoliation issue and the motion for summary judgment by Hassel. On the spoliation issue, the Appellate Division held that the defendants “failed to demonstrate that the parents disposed of the vehicle with knowledge of its potential evidentiary value.” Moreover, the court discussed the existence of other available evidence, including BMW’s Recall Bulletin and Hassel Motors-service records for the relevant period, which served to mitigate the loss of the vehicle. Basically, the court examined two of the key factors in evaluating spoliation sanctions – prejudice and intent – and determined that the movants had failed to establish either element in seeking sanctions.

As to plaintiff’s claims against Hassel, the Appellate Division held that the product liability and breach of implied and express warranty claims should be dismissed because the service provider did not design, manufacture, distribute or sell the vehicle. This holding may be the most important in the case because it clarifies that service providers, as opposed to product sellers, can not be held liable under strict product liability or breach of warranty theories of liability. Therefore, the only remaining claim against Hassel sounds in negligence, which may be difficult for plaintiff to establish at trial after a twenty year hiatus.

Apart from its other burdens, plaintiff will have to demonstrate general causation at trial, that is, whether exposure to chemical components in gasoline fumes have been associated in the scientific literature with the specific teratogenic effects alleged, including cerebral palsy. If plaintiff is able to prove general causation, he will then have to prove specific causation, that is, whether the dose of the purported teratogen was high enough, and lasted for a sufficient duration, to cause the specific birth defect.

The plaintiff attributes his injury to Debra Reeps’ inhalation of gas fumes during the first couple of months of her pregnancy between August 1991 and November 1991, when the problem with the vehicle was fixed. Are the alleged teratogenic effects associated with a toxic exposure early in pregnancy? How often did Debra Reeps ride in the automobile during those first couple of months? If the odor problem was significant, is it likely that the Reeps would not have returned their BMW 525i, which was under warranty, to the dealership before November? Because there is no expert deposition discovery under New York state practice, we will have to await trial to learn how these issues plays out.
 

 

 

Component Part Manufacturer Asbestos Liability

The plaintiff's bar continues to look for fresh targets in the asbestos litigation, utilizing increasingly creative theories of liability, as the original targets of plaintiffs' lawsuits have been largely forced into bankruptcy.  One of the new asbestos battlegrounds centers around the liability of parts manufacturers, such as pump and valve manufacturers, who never manufactured or sold asbestos-containing materials ("ACM").  Plaintiffs typically argue that these manufacturers may be liable for asbestos-containing products manufactured by different companies that they can reasonably anticipate will be used with their equipment.  However, in recent months, there have been a handful of appellate decisions suggesting that liability will not be extended to equipment manufacturers that neither sold nor included with their equipment ACM.  At the end of last year, the Supreme Court of Washington issued two decisions that rejected plaintiffs' claim that defendants should be held liable for failing to warn of the hazards of another manufacturer's product that is applied to or incorporated into the defendants' products.  The Supreme Court of Washington articulated a blanket rule that a duty to warn under common law negligence "is limited to those in the chain of distribution of the hazardous product."  The court also concluded that the defendants were not strictly liable for manufacturing a defective product because, not being product sellers or manufacturers, they could not translate their knowledge of the product's dangerous aspects into a cost of production against which liability insurance could be obtained.  Thus, the court held, it would be manifestly unfair to hold a defendant liable for another party's product. There is a good discussion of these cases, Simonetta v. Vlad Corp. and Braaten v. Saberhagen, in a Metropolitan Corporate Counsel article written by John E. Heintz and Justin F. Lavella at Kelly Drye & Warren LLP. A great deal was at stake on the appeal of these cases.  On February 25, 2009, The California Court of Appeal decided Taylor v. Elliot Turbomachinery Co. Inc  2009 WL 458543, and reached the same result as the Washington Court.  In rejecting plaintiffs' theory that the defendant should be liable for exposure to ACM in replacement parts sold and manufactured by other companies, the California court relied upon the California's "chain of distribution" line of cases that culminated in Cadio v. Owens-Illinois Inc. These cases recognize that "legal nightmares" would result if one company was held liable for the products of other companies.  There is a discussion of both the California and Washington decisions in a March 17, 2009 Law360 article  In an August 21, 2009 blog post by Michael J. Pietrykowski of Gordon & Rees, LLP, the DRI Blog reported that the California Supreme Court has declined to accept an appeal of Taylor v. Elliot Turbomachinery Co. Inc.  In the world of asbestos litigation, defense victories like these in Washington and California are hard fought and few and far between.

Is Safety Equipment Ever Optional?

Kenneth Ross, one of the more discerning authors in the product liability defense bar, has authored a thoughtful piece titled, Is There Anything Optional About Safety? in the August '09 DRI Product Liability Committee Newsletter--"Strictly Speaking".  As manufacturers design new products and update the design of old products, many times they sell and offer for sale differing levels of safety and quality.  Ken's article explores the legal and practical risks in selling products with these differences and provides advice to manufacturers about minimizing risk.  As one law professor notes, the case law is "muddled and quite sparse".  There are cases on both sides--those that hold that safety devices can be optional and those that hold that not installing a safety device establishes a basis for liability.  Ken discusses several important considerations that should be weighed in performing this delicate balancing act.

Should Brand Name Manufacturers Be Accountable For Side Effects Caused By Generics?

 

How can a brand-name pharmaceutical manufacturer owe a duty to patients who take only a generic version of its product? In a case of first impression in California, a state appellate court held on November 7, 2008 that Wyeth, Inc. owed a duty to plaintiff Elizabeth Conte, who developed a serious and irreversible neurological condition as a result of taking metoclopramide, the generic version of Wyeth’s Reglan, which is used to treat gastroesophageal reflux disease. In so holding, the California appellate court declined to follow the holdings of a majority of courts that have grappled with this issue.

In Elizabeth Ann Conte v. Wyeth, Inc. et al., the Court of Appeal of the State of the California in the First Appellate District in San Francisco, held that a brand-name pharmaceutical manufacturer’s common law duty to use due care when providing product warnings extends not only to consumers of its own product, but also to those patients whose doctors foreseeably rely on the name-brand manufacturer’s product information in prescribing a medication, even if the prescription is filled with the generic version of the drug. In reversing summary judgment granted to Wyeth by the trial court, the appellate court accepted Conte’s argument that Wyeth should be liable for her injuries because a brand-name manufacturer that disseminates information about its product owes a duty of care to ensure the information’s accuracy to all physicians who prescribe the drug in reasonable reliance on that information, even if the patient ends up taking the product’s generic equivalent.

The court agreed with Wyeth that Conte could not pursue a strict products liability claim against Wyeth. Indeed, Conte did not allege that Wyeth was strictly liability due to inadequate warnings. Rather, she claimed that Wyeth failed to exercise due care in disseminating its product information to physicians.  The court rejected Wyeth’s contention that Conte’s case was merely a product liability suit masquerading as a negligence case. The court held that the plaintiff could pursue claims of intentional and/or negligent misrepresentation based upon Wyeth’s labeling information about the safety of metoclopramide, the risks of its long term use, and the likelihood of serious side effects. 

Was the court correct in determining that Wyeth owed the plaintiff a duty in a negligence context where no such duty could be found to exist in a strict liability case? As a matter of public policy, should a brand-name drug manufacturer be subjected to what Wyeth argued might be “permanent and uncontrolled liability” in perpetuity. Even as a brand-name manufacturer’s sales decrease over time, its potential product liability exposure may actually increase because of higher market share won by generic competitors. Ironically, the generic manufacturer takes precious market share from the brand-name manufacturer at the same time that the court shifts the generic’s product liability exposure back to the pioneer. 

We believe that the better reasoned analysis of this issue may be found in Foster v. American Home Products Corp. (4th Cir. 1994) 29 F.3d. 165 (2003), in which the Fourth Circuit held that a manufacturer of a name-brand drug could not be held liable under a theory of negligent representation for an injury arising from the ingestion of a generic version of the drug. Taken to its logical extreme, in the brave new world envisioned by the Conte court, it may not matter that a plaintiff cannot identify the manufacturer of a product that caused an alleged injury so long as the plaintiff can plausibly claim to have relied on some other manufacturer’s operator’s manual.

Is Electricity a "Product"?

Whether electricity supplied to a homeowner by the local electric utility  is viewed as a "product" or a "service" may have significant ramifications in litigation.  If providing electricity constitutes a "product", injured plaintiffs can seek recovery under a theory of strict liability.  If it is not a product, the plaintiff would have to demonstrate the electric utility failed to use reasonable care.  In a recent Connecticut case, Travelers Indemnity Company of America v. Connecticut Light & Power Co, Hartford J.D. at Harford (Docket No. CV-07-5012441-S ) 2008 WL 2447351 (Conn. Super.), the trial court  held that once electricity entered the homeowner's residence, it constituted a "product" rather than a "service" and that plaintiff could  proceed under the Connecticut Product Liability Act ("CPLA").   In the case, a fire allegedly caused by voltage fluctuations broke out in the home of Travelers' insureds, Linda and Michael Murphy, resulting in property damage.  Apparently,  the Murphy's had complained to CL&P earlier about the voltage fluctuations and had been assured that the problem had been addressed.  After paying the claim,

Connecticut courts are split concerning whether electricity can be classified as a product such that a claim could be brought under the CPLA..  However, the court in Travelers relied upon what appears to be an emerging majority view nationally.  In a 1985 California appellate decision, Pierce v. PG&E, the court opined that policy justifications warranted the imposition of strict liability: (1)  difficulty of proving negligence involving a vast and complex electrical power system; (2) economic incentive for improved product safety; (3) to encourage reallocation of resources toward safer products; and (4) to spread the risk of loss among all who use the product.  What judicial limitations may be reasonable to prevent increased access to strict liability in tort for toxic tort plaintiffs injured by electricity? One bright line test might be permit electricity to be viewed as a product only when the electricity has been transferred to the consumer in a usable voltage.  Only then could a court reasonably view electricity as a consumer product.  Under this test, exposure to high voltage transmission lines would not result in a strict liability lawsuit.